INSTALLATION PAIR VALVE ELIMINATOR KIT SUZUKI

Step 1 : Remove the fuel tank according to the owner’s manual. Locate The PAIR valve (4) and the pipes attached to it (5)(6)(7).

Step 2 : Disconnect the PAIR valve (4) from the wiring harness and connect the electronic eliminator in its place.

Step 3 : Unplug the PAIR hose (5) from the air box, cover the air box nipple with one of the provided rubber caps and use the original retainer (8) to secure it.

Step 4 : Unplug the PAIR hoses from each of the engine valve cover plates of the pair system (10), cover the pair valve plate nipples (10) with the remaining two rubber caps and use the original retainers (9) to secure them.

Step 5 : Remove the AIS valve (4), the pipes (5)(6)(7) and its associated hardware (2)(9) from the motorcycle.