The CoolAIR Manual Radiator Fan Switch by SmartMoto allows the manual activation of the radiator fan. This allows you to keep the engine temperature low when you ride at low speeds, waiting in traffic or in any other prolonged idle operation.
There are a lot of DIY mods out there that allow you to modify your motorcycle's wiring at the cost of splicing the harness or even worse, damaging the electronics.
On a motorcycle, when the engine temperature exceeds a pre-set level, a thermo switch on the radiator activates the radiator fan. By activating the radiator fan sooner, you prevent the engine from overheating.
SmartMoto Wiring Harness products brings the CoolAIR Manual Radiator Fan Switch that simply connects between the thermo switch and the wiring harness, without any non reversible or risky modifications. It also incorporates an intelligent design and even when turned OFF it maintains the standard radiator fan operation; the fan will be activated normally when the coolant temperature reaches the pre-set level.
- Keeps the engine temperature at low levels and protects the engine from overheating in traffic.
- Perfect when performing maintenance tasks on your motorcycle that require prolonged idle operation, such as TPS adjustment.
- Intelligent design that keeps the standard radiator fan operation when the CoolAIR switch is turned off.
- Cable length: 120cm.